Non-Invasive, Continuous, Quantitative Detection of Solvent Content in Vacuum Tray Drying.

A non-invasive capacitance instrument was embedded in the base of a vacuum-drying tray to monitor continuously the residual amount of solvent left in a pharmaceutical powder. Proof of concept was validated with Microcrystalline Cellulose laced with water, as well as water/acetone mixtures absorbed in a spray-dried Copovidone powder. To illustrate the role of impermeability of the base, we derive a model of vapor sorption that reveals the existence of a kinetic limit when solids are thinly spread, and a diffusion limit with greatly diminished effective diffusivity at large powder thickness. By monitoring the residual solvent content of powders, this new in situ technique offers advantages over indirect methods like mass spectrometry of vapor effluents, but without complications associated with probe fouling. To prescribe design guidelines and interpret signals, we model the electric field shed by the probe when a powder holds variable solvent mass fraction in the vertical direction.

Stability of a Multiresponsive Sulfonium Vinyl Sulfide Linker toward Nucleophilic/Radical Thiols, Reactive Nitrogen Species, and in Cells under Pro-inflammatory Stimulation.

Chemical linkages that respond to biological stimuli are important for many pharmaceutical and biotechnological applications, making it relevant to explore new variants with different responsivity profiles. This work explores the responsiveness of a TAT peptide-based sulfonium vinyl sulfide probe that responds to nucleophilic thiols, radical thiol species (RTS), and reactive nitrogen species (RNS). Under model conditions, response to nucleophilic thiols was very slow (hours/days), though fast with down to molar equivalents of either RTS or RNS (minutes). These reactions led to the traceless release of a methionine-containing peptide in the first two cases and to a hydroxy nitration adduct in the third case. Despite the sensitive nature of the probe, it remained stable for at least ∼2 h in the presence of cells during TAT-mediated trafficking, even under pro-inflammatory stimulation. The thiol-responsiveness is intermediate to that observed for disulfide linkers and conventional cysteine-maleimide linkers, presenting opportunities for biotechnological applications.

Synthesis of Well-Defined Poly(vinyl alcohol-co-vinyl acetate) Copolymers by Alcoholysis of Poly(vinyl acetate) Synthesized by Macromolecular Design via Interchange of Xanthate Polymerization, and Their Use as a Stabilizer in Emulsion (Co)polymerization of Vinyl Acetate.

This work aims at synthesizing tailor-made poly(vinyl alcohol-co-vinyl acetate) (PVA) amphiphilic copolymers, obtained by alcoholysis of poly(vinyl acetate) (PVAc) that could display improved properties as stabilizers compared to commercially available PVAs. Well-defined PVAs with different alcoholysis degrees were produced from a library of PVAc homopolymers synthesized by macromolecular design via interchange of xanthate polymerization and exhibiting different degrees of polymerization degrees. Subsequently, these PVAs were evaluated as stabilizers in the emulsion copolymerization of VAc and vinyl neodecanoate (VERSA 10, referred to as V10) and compared to a commercially available reference PVA obtained by alcoholysis of PVAc formed by conventional radical polymerization. In all cases, stable latexes were obtained and compared in terms of their colloidal characteristics. To identify the best stabilizer candidate, the amount of PVA remaining in water and not participating to the particle stabilization was evaluated in each case.

Bu-Shen-Ning-Xin decoction ameliorates premature ovarian insufficiency by suppressing oxidative stress through rno_circRNA_012284/rno_miR-760-3p/HBEGF pathway.

BACKGROUND: POI (premature ovarian insufficiency) refers to premature and rapid decline of ovarian reserve function in women before the age of 40, which can be manifested as menstrual disorders, endocrine abnormalities and low fertility. Bu-Shen-Ning-Xin decoction (BSNXD) has been found to have therapeutic effects on POI. Nevertheless, how it exerts therapeutic effects remains elusive. PURPOSE: This research aims to clarify the pharmacological mechanisms of BSNXD. METHODS: We applied Ultra Performance Liquid Chromatography (UPLC) to identify the main components of BSNXD.4-vinylcyclohexene diepoxide(VCD)was used to induce POI models. ELISA detected the serum level of hormones. H&E staining evaluated the morphology of ovarian tissues.CircRNA and mRNA expression profiles in the ovaries of both POI rats and those treated with BSNXD were detected. Then, dysregulated circRNAs and mRNAs that were potentially altered by BSNXD were screened. Network pharmacology analysis was performed to identify drug targets of BSNXD active ingredients. A circRNA-miRNA-mRNA network and an oxidative stress(OS)-related subnetwork were constructed. Expression of rno_circRNA_012284, rno_miR-760-3p, and HBEGF(Heparin-binding epidermal growth factor-like growth factor) was measured by RT-PCR and their binding were verified by dual-luciferase reporter assays. ROS was measured through DCFH-DA fluorescence probes. The HBEGF target was selected for molecular docking with key active ingredients.Surface plasmon resonance(SPR) was applied to verify the binding ability and affinity between components and HBEGF. RESULTS: UPLC analysis indicated that 6 chemical compounds including berberine, paeoniflorin, morroniside,gallic acid, loganin, baicalin were identified.Elevated FSH and LH levels, suppressed E2 and AMH levels in the serum, and inhibited follicles and corpus luteums in the ovarian tissues of VCD-induced rats were notably reversed by BSNXD.In total, 992 up- and 1135 down-regulated circRNAs, and 205 up- and 243 down-regulated mRNAs were found in POI rat ovaries following BSNXD administration. Furthermore, 198 drug targets of BSNXD were identified. An OS-related and BSNXD-targeted ceRNA subnetwork composed of rno_circRNA_012284/rno_miR-760-3p/HBEGF was established. rno_circRNA_012284 and HBEGF were up-regulated and rno_miR-760-3p was down-regulated in POI ovarian granulosa cells (OGCs) after BSNXD administration. rno_circRNA_012284 was a sponge of rno_miR-760-3p to elevate HBEGF expression. Moreover, rno_circRNA_012284 overexpression alleviated POI-induced excessive ROS generation in ovarian granulosa cells, while rno_circRNA_012284 inhibition exerted the opposite effect. Finally,molecular docking speculated active ingredients of each herb acted on HBEGF to reduce the OS. SPR tests showed that Berberine,Baicalein,Quercetin,Pachymic acid,Paeoniflorin exhibited satisfying affinity with HBEGF protein. CONCLUSION: This study demonstrates that BSNXD ameliorates POI partly by attenuating OS in ovarian granulosa cells via rno_circRNA_012284/rno_miR-760-3p/HBEGF axis, uncovering the pharmacological mechanisms of BSNXD in alleviating POI.

Exploring the influence of hydrogen bond donor groups on the microstructure and intermolecular interactions of amorphous solid dispersions containing diflunisal structural analogues.

Drug-polymer intermolecular interactions, and H-bonds specifically, play an important role in the stabilization process of a compound in an amorphous solid dispersion (ASD). However, it is still difficult to predict whether or not interactions will form and what the strength of those interactions would be, based on the structure of drug and polymer. Therefore, in this study, structural analogues of diflunisal (DIF) were synthesized and incorporated in ASDs with poly(vinylpyrrolidone-co-vinyl acetate) (PVPVA) as a stabilizing polymer. The respective DIF derivatives contained different types and numbers of H-bond donor groups, which allowed to assess the influence of these structural differences on the phase behavior and the actual interactions formed in the ASDs. The highest possible drug loading of these derivatives in PVPVA were evaluated through film casting. Subsequently, a lower drug loading of each compound was spray dried. These spray dried ASDs were subjected to an in-depth solid-state nuclear magnetic resonance (ssNMR) study, including 1D spectroscopy and relaxometry, as well as 2D dipolar HETCOR experiments. The drug loading study revealed the highest possible loading of 50 wt% for the native DIF in PVPVA. The methoxy DIF derivative reached the second highest drug loading of 35 wt%, while methylation of the carboxyl group of DIF led to a sharp decrease in the maximum loading, to around 10 wt% only. Unexpectedly, the maximum loading increased again when both the COOH and OH groups of diflunisal were methylated in the dimethyl DIF derivative, to around 30 wt%. The ssNMR study on the spray dried ASD samples confirmed intermolecular H-bonding with PVPVA for native DIF and methoxy DIF. Studies of the proton relaxation decay times and 2D 1H-13C dipolar HETCOR experiments indicated that the ASDs with native DIF and methoxy DIF were homogenously mixed, while the ASDs containing DIF methyl ester and dimethyl DIF were phase separated at the nm level. It was established that, for these systems, the availability of the carboxyl group was imperative in the formation of intermolecular H-bonds with PVPVA and in the generation of homogenously mixed ASDs.

Impact of surfactant raw material variability on extrudate clarity appearance (transparency) in HME continuous manufacturing.

The appearance of an extrudate formulation was monitored during hot-melt extrusion (HME) continuous manufacturing over 3 days. The formulation matrix consisted of a polymeric component, copovidone, and a low molecular weight surfactant, polysorbate 80. Based on studies prior to the continuous manufacturing, the desired appearance of the target extrudate is translucent. Although process parameters such as feed rate and screw speed were fixed during the continuous manufacturing, the extrudate appearance changed over time from turbid to translucent. For root-cause investigation, the extrudates were analyzed offline by differential scanning calorimetry (DSC) and advanced polymer chromatography (APC™). Although the polysorbate 80 content of both turbid and translucent extrudates was within target, the glass transition temperature of the turbid extrudate was 2 °C above expected value. The observed turbidity was traced to lot-to-lot variability of the polysorbate 80 used in the continuous manufacturing, where APC™ analysis revealed that the relative content of the low molecular weight component varied from 23% to 27% in correlation with the evolution from turbid to translucent extrudates. This work stresses the importance of taking feeding material variability into account during continuous manufacturing.

Effect of crosslinker/porogen ratio on sponge-nested polymer monoliths for solid-phase extraction.

Polymer monoliths can be polymerised within different molds, but limited options are available for the preparation of free-standing polymer monoliths for analytical sample preparation, and in particular, solid-phase extraction (SPE). Commercial melamine-formaldehyde sponges can be used as supports for the preparation of polymer monoliths, due its flexibility, giving various shapes to monoliths. Herein, the crosslinker/porogen ratio of highly porous sponge-nested divinylbenzene (DVB) polymer monoliths has been evaluated. Monoliths prepared using different crosslinker/porogen ratios were applied to the extraction of bisphenol F, bisphenol A, bisphenol AF, and bisphenol B. Monoliths containing 50 wt % DVB and 50 wt % porogens presented the highest recovery of bisphenols. Under the optimised conditions, the developed method showed a linear range between 2.5 µg L-1 and 150 µg L-1 for BPA and BPAF, and between 5 µg L-1 and 150 µg L-1 for BPB and BPF. The limits of detection (LOD, S/N = 3) and limits of quantification (LOQ, S/N = 10) ranged from 0.36 µg L-1 to 1.09 µg L-1, and from 1.20 µg L-1 to 3.65 µg L-1, respectively. The recoveries for spiked bisphenols (10 µg L-1) in tap water and water contained in a polycarbonate containers were between 82 % and 114 %.

Material compatibility and processing challenges in droplet deposition modelling additive manufacturing: A study on pharmaceutical excipients Polyvinylpyrrolidone/vinyl acetate (PVP/VA) and Polycaprolactone (PCL).

Additive manufacturing (AM) enables the production of complex, lightweight, and customized components with superior quality. Selecting the right materials considering their thermal properties, printability, and layer adhesion is crucial in melting-based AM techniques. This study investigates Droplet Deposition Modelling (DDM), an innovative material extrusion process that utilizes thermoplastic granules. DDM is distinguished by its shorter manufacturing times and a wider range of materials, setting it apart from traditional material extrusion methods such as fused filament fabrication. We investigated the printability and part quality in DDM using two common pharmaceutical excipients: Polyvinylpyrrolidone/vinyl acetate 6:4 (PVP/VA), which is highly brittle, and Polycaprolactone (PCL), known for its low solubility and role in controlled drug release. Different ratios of PVP/VA and PCL were compounded via hot melt extrusion (HME) and used in DDM to study the impact of ingredient content on printability and part quality, employing geometrical models to assess material compatibility and printability. The study revealed that increasing PVP/VA content leads to higher viscosity, reduced flowability, and uneven deposition, with formulations of 80 % and 100 % PVP/VA showing poor processability. In contrast, formulations with 60 % and 40 % PVP/VA exhibited smooth processing and compatibility with DDM. We identified processing temperature and Drop Aspect Ratio (DAR) as key factors influencing material printability and part quality. Elevated processing temperatures and reduced DAR were found to increase interface temperatures, reduce diffusion, and potentially cause the 'elephant feet' issue. Additionally, smaller droplet sizes and material characteristics, such as higher interfacial tension in PCL, could lead to coalescence. Our findings highlight the complexities in optimizing DDM processing parameters and material blends, underscoring the need for careful formulation design to achieve high-quality 3D printed products.

Perimenopausal and Menopausal Mammary Glands In A 4-Vinylcyclohexene Diepoxide Mouse Model.

As both perimenopausal and menopausal periods are recognized critical windows of susceptibility for breast carcinogenesis, development of a physiologically relevant model has been warranted. The traditional ovariectomy model causes instant removal of the entire hormonal repertoire produced by the ovary, which does not accurately approximate human natural menopause with gradual transition. Here, we characterized the mammary glands of 4-vinylcyclohexene diepoxide (VCD)-treated animals at different time points, revealing that the model can provide the mammary glands with both perimenopausal and menopausal states. The perimenopausal gland showed moderate regression in ductal structure with no responsiveness to external hormones, while the menopausal gland showed severe regression with hypersensitivity to hormones. Leveraging the findings on the VCD model, effects of a major endocrine disruptor (polybrominated diphenyl ethers, PBDEs) on the mammary gland were examined during and after menopausal transition, with the two exposure modes; low-dose, chronic (environmental) and high-dose, subacute (experimental). All conditions of PBDE exposure did not augment or compromise the macroscopic ductal reorganization resulting from menopausal transition and/or hormonal treatments. Single-cell RNA sequencing revealed that the experimental PBDE exposure during the post-menopausal period caused specific transcriptomic changes in the non-epithelial compartment such as Errfi1 upregulation in fibroblasts. The environmental PBDE exposure resulted in similar transcriptomic changes to a lesser extent. In summary, the VCD mouse model provides both perimenopausal and menopausal windows of susceptibility for the breast cancer research community. PBDEs, including all tested models, may affect the post-menopausal gland including impacts on the non-epithelial compartments.

System-agnostic prediction of pharmaceutical excipient miscibility via computing-as-a-service and experimental validation.

We applied computing-as-a-service to the unattended system-agnostic miscibility prediction of the pharmaceutical surfactants, Vitamin E TPGS and Tween 80, with Copovidone VA64 polymer at temperature relevant for the pharmaceutical hot melt extrusion process. The computations were performed in lieu of running exhaustive hot melt extrusion experiments to identify surfactant-polymer miscibility limits. The computing scheme involved a massively parallelized architecture for molecular dynamics and free energy perturbation from which binodal, spinodal, and mechanical mixture critical points were detected on molar Gibbs free energy profiles at 180 °C. We established tight agreement between the computed stability (miscibility) limits of 9.0 and 10.0 wt% vs. the experimental 7 and 9 wt% for the Vitamin E TPGS and Tween 80 systems, respectively, and identified different destabilizing mechanisms applicable to each system. This paradigm supports that computational stability prediction may serve as a physically meaningful, resource-efficient, and operationally sensible digital twin to experimental screening tests of pharmaceutical systems. This approach is also relevant to amorphous solid dispersion drug delivery systems, as it can identify critical stability points of active pharmaceutical ingredient/excipient mixtures.

The AERO prosthetic liner: socket pressure distribution, comfort and material composition.

PURPOSE: This study aimed to evaluate the pressure distribution and comfort of transtibial prosthesis wearers using an affordable ethyl-vinyl acetate (EVA) roll-on (AERO) liner. METHOD: Fifteen unilateral transtibial prosthesis users wore patella tendon bearing (PTB) sockets with a polyethylene foam (PE-lite) liner were enrolled this study. AERO liners were provided to all participants. Six force sensors were applied to the residual limb to evaluate pressure distribution during treadmill walking, and the socket comfort score (SCS) was used to evaluate comfortability. Fourier transform infrared (FT-IR) spectroscopy was performed on the EVA and PE-lite liners. RESULTS: Eleven participants used prefabricated AERO liners and four participants used custom-made AERO liners. The pressure distribution was analysed by the coefficient of variation (CV): PE-lite was 75.7 ± 6.0 and AERO liner 83.3 ± 4.1. Residual limb pressure was significantly decreased when using the AERO liner (p = .0007), with a large effect size (r = 0.87). Mean SCS was 7.5 ± 1.3 and 8.9 ± 1.1 for PE-lite and AERO liner respectively. CONCLUSION: Better pressure distribution and comfort were observed when the participants used the AERO liner. AERO had a greater proportion of calcium carbonate (CaCO3). These findings suggest that the AERO liner is a better off-the-shelf option for persons using traditional prosthetic sockets and liners.

The Protective Role of Magnoliae Flos in Preventing Ovotoxicity and Managing Ovarian Function: An In Vitro and In Vivo Study.

Magnoliae Flos (MF) is a medicinal herb widely employed in traditional medicine for relieving sinusitis, allergic rhinitis, headaches, and toothaches. Here, we investigated the potential preventive effects of MF extract (MFE) against 4-vinylcyclohexene diepoxide (VCD)-induced ovotoxicity in ovarian cells and a mouse model of premature ovarian insufficiency (POI). The cytoprotective effects of MFE were assessed using CHO-K1 or COV434 cells. In vivo, B6C3F1 female mice were intraperitoneally injected with VCD for two weeks to induce POI, while MFE was orally administered for four weeks, beginning one week before VCD administration. VCD led to a significant decline in the viabilities of CHO-K1 and COV434 cells and triggered excessive reactive oxygen species (ROS) production and apoptosis specifically in CHO-K1 cells. However, pretreatment with MFE effectively prevented VCD-induced cell death and ROS generation, while also activating the Akt signaling pathway. In vivo, MFE increased relative ovary weights, follicle numbers, and serum estradiol and anti-Müllerian hormone levels versus controls under conditions of ovary failure. Collectively, our results demonstrate that MFE has a preventive effect on VCD-induced ovotoxicity through Akt activation. These results suggest that MFE may have the potential to prevent and manage conditions such as POI and diminished ovarian reserve.

Hydrophobic Aerogels from Vinyl Polymers Derived from Radical Polymerization: Proof-of-Concept.

Hydrophilicity is one important drawback of bio-based aerogels. To overcome this issue, a novel approach for the preparation of mesoporous, water repellent aerogels is introduced, which combines synthesis of cross-linked bio-based copolymers from methacrylate copolymerizations, followed by solvent exchange and supercritical drying steps. The influence of monomers with different nonpolar ester groups (methyl, vanillin, tetrahydrofurfuryl) on textural properties and water contact angles of the dry products is assessed. Final aerogels show generally high overall porosities (≈96%), low densities (0.07-0.11 g cm-3) as well as fine, mainly mesoporous networks, and specific surface areas in the range of 120-240 m2 g-1. Hereby, choice of the methacrylate ester groups results in differences of the resulting pore-size distributions. Water repellency tests show stable static water contact angles in the hydrophobic range (≈100°) achieved for the substrate containing the vanillin ester group. On the contrary the other substrates absorb water quickly, which indicates a decisive role of the ester group. The presented approach opens up a new pathway to bio-based aerogels with intrinsic hydrophobicity. It is suggested that the properties are tailored by the choice of the monomer structure, hence enabling further adaption and optimization of the products.

Michael addition-activated alkylation of G-quadruplex DNA with methylamine-protected vinyl-quinazolinone derivatives.

The role of G-quadruplex (G4) in cellular processes can be investigated by the covalent modification of G4-DNA using alkylating reagents. Controllable alkylating reagents activated by external stimuli can react elegantly and selectively. Herein, we report a chemical activation system that can significantly boost the reaction rate of methylamine-protected vinyl-quinazolinone (VQ) derivative for the alkylation of G4-DNA. The two screened activators can transform low-reactive VQ-NHR' to highly reactive intermediates following the Michael addition mechanism. This approach expands the toolbox of activable G4 alkylating reagents.

Perimenopause Decreases SERCA2a Activity in the Hearts of a Mouse Model of Ovarian Failure.

Risk of cardiovascular disease mortality rises in women after menopause. While increased cardiovascular risk is largely attributed to postmenopausal declines in estrogens, the molecular changes in the heart that contribute to risk are poorly understood. Disruptions in intracellular calcium handling develop in ovariectomized mice and have been implicated in cardiac dysfunction. Using a mouse model of menopause in which ovarian failure occurs over 120 days, we sought to determine if perimenopause impacted calcium removal mechanisms in the heart and identify the molecular mechanisms. Mice were injected with 4-vinylcyclohexene diepoxide (VCD) to induce ovarian failure over 120 days, mimicking perimenopause. Hearts were removed at 60 and 120 days after VCD injections, representing the middle and end of perimenopause. SERCA2a function was significantly diminished at the end of perimenopause. Neither SERCA2a nor phospholamban expression changed at either time point, but phospholamban phosphorylation at S16 and T17 was dynamically altered. Intrinsic SERCA inhibitors sarcolipin and myoregulin increased >4-fold at day 60, as did the native activator DWORF. At the end of perimenopause, sarcolipin and myoregulin returned to baseline levels while DWORF was significantly reduced below controls. Sodium-calcium exchanger expression was significantly increased at the end of perimenopause. These results show that the foundation for increased cardiovascular disease mortality develops in the heart during perimenopause and that regulators of calcium handling exhibit significant fluctuations over time. Understanding the temporal development of cardiovascular risk associated with menopause and the underlying mechanisms is critical to developing interventions that mitigate the rise in cardiovascular mortality that arises after menopause.

THE EFFECT OF 4-VINYLCYCLOHEXENE DIEPOXIDE ON FEMALE NUTRIA (MYOCASTOR COYPUS) FERTILITY IN CAPTIVITY-A PILOT STUDY.

The nutria (Myocastor coypus) is a globally widespread invasive species. Attempts to eradicate nutria by shooting, poisoning, and trapping have been mostly unsuccessful, leading to calls for the development of new control methods. The compound 4-vinylcyclohexene diepoxide (VCD) is known to cause follicular atresia in mammals and may control conception when administered orally. It was hypothesized that VCD administered PO will cause follicular destruction in female nutria. VCD (250 mg/kg PO) was administered or coconut oil, as a control, to five nutria females each for 12 d. Sixty days following VCD exposure, males were introduced to the females. Over the following 7 mon, the effect of VCD on nutria fertility was assessed by conducting ultrasound monitoring to determine pregnancy status and measuring blood serum progesterone and estradiol levels. Finally, after performing ovariectomies, viable follicles were counted on histologic ovarian cortical sections. It was found that the female estrous cycles became synchronized, suggesting a Whitten effect in this species. Also, an increase in the females' serum progesterone levels following the introduction of males occurred, suggesting a male presence effect. Orally administered doses of 250 mg/kg VCD for 12 d had no significant effect on nutria pregnancy rates or on the number of follicles in the ovaries examined. Further studies, using a higher dose or longer administration period, are necessary to conclude whether orally administered VCD can be used as a contraceptive agent for nutria.

Biodegradable Alkali-Swellable Emulsion Polymers: Industrial and Commercial Thickeners.

Sustainability and circularity are key issues facing the global polymer industry. The search for biodegradable and environmentally-friendly polymers that can replace conventional materials is a difficult challenge that has been met with limited success. Alternatives must be cost-effective, scalable, and provide equivalent performance. We report that latexes made by the conventional emulsion polymerization of vinyl acetate and functional vinyl ester monomers are efficient thickeners for consumer products and biodegrade in wastewater. This approach uses readily-available starting materials and polymerization is carried out in water at room temperature, in one pot, and generates negligible waste. Moreover, the knowledge that poly(vinyl ester)s are biodegradable will lead to the design of new green polymer materials.

Vinyl and methyl-ester groups in the insoluble polymer drug patiromer identified and quantified by solid-state NMR.

Patiromer (Veltassa®) is a crosslinked, insoluble co-polymer drug used as a nonabsorbent potassium binder, approved for treatment of hyperkalemia. Quantitative solid-state 13C nuclear magnetic resonance (NMR) analysis with comprehensive peak assignment, component quantification, and calculation of mole and weight fractions of monomer units was performed on three doses of patiromer. The workflow is documented in detail. Spectrally edited solid-state 13C NMR spectra of patiromer show =CHn peaks of matching intensity at 116 and 141 ppm, characteristic of -CH=CH2 vinyl groups. Similar spectral features can be observed in earlier studies but were previously ignored. In this study, the vinyl signals are well-resolved in a 2-s direct polarization (DP) spectrum without and with dipolar dephasing, which confirms that these sp2-hybridized carbons are bonded to hydrogen and partially mobile, consistent with vinyl side groups from incompletely reacted divinyl crosslinkers. The vinyl groups account for 1.6% of all carbon, 3% of the monomer units, and nearly 1/3 of the crosslinkers. Furthermore, an unexpected OCH3 moiety accounting for ∼1.2% of all carbons was identified by spectral editing; its chemical shift of 54 ppm is more consistent with a methyl ester than with a methyl ether. It can originate from incomplete hydrolysis of ∼6% of methyl-2-fluoroacrylate, the main monomer of patiromer. Characteristic cross peaks in two-dimensional 1H-13C heteronuclear correlation NMR confirm the presence of the vinyl and OCH3 groups. Trace amounts of xanthan gum are also detected. The quantitative 13C NMR spectrum of patiromer has been matched in a simulation using a model with five monomer units.

Colyophilized Sugar-Polymer Dispersions for Enhanced Processing and Storage Stability.

Sucrose and trehalose pharmaceutical excipients are employed to stabilize protein therapeutics in a dried state. The mechanism of therapeutic protein stabilization is dependent on the sugars being present in an amorphous solid-state. Colyophilization of sugars with high glass transition polymers, polyvinylpyrrolidone (PVP), and poly(vinylpyrrolidone vinyl acetate) (PVPVA), enhances amorphous sugar stability. This study investigates the stability of colyophilized sugar-polymer systems in the frozen solution state, dried state postlyophilization, and upon exposure to elevated humidity. Binary systems of sucrose or trehalose with PVP or PVPVA were lyophilized with sugar/polymer ratios ranging from 2:8 to 8:2. Frozen sugar-PVPVA solutions exhibited a higher glass transition temperature of the maximally freeze-concentrated amorphous phase (Tg') compared to sugar-PVP solutions, despite the glass transition temperature (Tg) of PVPVA being lower than PVP. Tg values of all colyophilized systems were in a similar temperature range irrespective of polymer type. Greater hydrogen bonding between sugars and PVP and the lower hygroscopicity of PVPVA influenced polymer antiplasticization effects and the plasticization effects of residual water. Plasticization due to water sorption was investigated in a dynamic vapor sorption humidity ramping experiment. Lyophilized sucrose systems exhibited increased amorphous stability compared to trehalose upon exposure to the humidity. Recrystallization of trehalose was observed and stabilized by polymer addition. Lower concentrations of PVP inhibited trehalose recrystallization compared to PVPVA. These stabilizing effects were attributed to the increased hydrogen bonding between trehalose and PVP compared to trehalose and PVPVA. Overall, the study demonstrated how differences in polymer hygroscopicity and hydrogen bonding with sugars influence the stability of colyophilized amorphous dispersions. These insights into excipient solid-state stability are relevant to the development of stabilized biopharmaceutical solid-state formulations.

Simultaneous Water Sorption and Crystallization in ASDs 2: Modeling Long-Term Stabilities.

The physical stability of amorphous solid dispersions (ASDs) is a major topic in the formulation research of oral dosage forms. To minimize the effort of investigating the long-term stability using cost- and time-consuming experiments, we developed a thermodynamic and kinetic modeling framework to predict and understand the crystallization kinetics of ASDs during long-term storage below the glass transition. Since crystallization of the active phrarmaceutical ingredients (APIs) in ASDs largely depends on the amount of water absorbed by the ASDs, water-sorption kinetics and API-crystallization kinetics were considered simultaneously. The developed modeling approach allows prediction of the time evolution of viscosity, supersaturation, and crystallinity as a function of drug load, relative humidity, and temperature. It was applied and evaluated against two-year-lasting crystallization experiments of ASDs containing nifedipine and copovidone or HPMCAS measured in part I of this work. We could show that the proposed modeling approach is able to describe the interplay between water sorption and API crystallization and to predict long-term stabilities of ASDs just based on short-term measurements. Most importantly, it enables explaining and understanding the reasons for different and sometimes even unexpected crystallization behaviors of ASDs.